How NOT to blow up your MOSFET/IGBT! Why do my MOSFET/IGBT fail? Parasitic Turn On Of MOSFETs /IGBTs

• shows 3phase BLDC motor driver

https://www.youtube.com/watch?v=cr0mSRCWyK8

A video using standard parts for driving a MOSFET

https://www.youtube.com/watch?v=wv4uAz8FV2w

Update! Use FreeRDP version 3!

i had a problem with version 2, where when i connect from Windows 11 RDP client, i get about 1 second of updating video, and then it stops. mouse movements do get through and the mouse-pointer shape does update.

Install

$ sudo apt install freerdp3-x11 freerdp3-shadow-x11

Run the server part

$ freerdp-shadow-cli3

links:

• https://launchpad.net/ubuntu/+source/freerdp3
• https://github.com/FreeRDP/FreeRDP/releases
• https://manpages.debian.org/unstable/freerdp3-shadow-x11/freerdp-shadow-cli3.1.en.html

Update

Replaced the ESP8266 “serial->espnow sender” board with an “ESP32 C3 mini” board. The C3 has a single core (similar like the Sx variants), but the C3 does support “ESPNOW”.

MJPEG decoders compared (ESP32)

https://www.atomic14.com/2023/09/30/a-faster-esp32-jpeg-decoder

• https://github.com/atomic14/esp32-jpeg-perf-tests/blob/main/README.md

Technical reference page 314 (12.1 Overview)

Technical reference page 318

Technical reference page 324

https://microbots.io/products/codecell

https://github.com/microbotsio/CodeCell

DMD_STM32 - Arduino STM32 Matrix Panel Library - Comprehensive info! (STM32, RP2040)

https://github.com/board707/DMD_STM32/wiki/Led_drivers

Mysterious LED matrix drivers – chipone ICN20xx datasheets?

• https://kuku.eu.org/?projects/hub75e/index mentions:
  • https://bitbucket.org/nadyrshin_ryu/icn2053_esp32_demo/src/master/
  • deepdive #1 https://www.youtube.com/watch?v=xyycbgZXPzE
  • deepdive #2 https://www.youtube.com/watch?v=nhCGgTd7OHg

Casting to your device

• Linux / RPI
  • MiraCast / LazyCast / MiracleCast
  • RPiPlay, PiCast, MiracleCast, Kodi, VNC, GnomeCast
• ESP32
  • ESPFLIX 😍 https://rossumblog.com/2020/08/08/espflix-a-free-video-streaming-service-that-runs-on-an-esp32/

WiFi Screen Receiver Using MakePython ESP32 Color LCD (ESP32)

https://www.hackster.io/H0meMadeGarbage/wifi-screen-receiver-using-makepython-esp32-color-lcd-160c11

STM32Duino library for RGB, Monochrome and Two-color led matrix panels (STM32, RP2040)

https://github.com/board707/DMD_STM32

Joy-it RB-MatrixCtrl Controller HAT voor LED-Matrix-module RB-MatrixCtrl (Raspberry Pi)

https://joy-it.net/en/products/RB-MatrixCtrl

RP2040 Hub75 driver : hub75-pio-rs (rust RP2040)

https://github.com/kjagiello/hub75-pio-rs

Dev Boards

• Pimoroni Interstate 75 - RGB LED Matrix Driver board, 1x HUB75 (RP2040)

  https://eu.robotshop.com/products/interstate-75-rgb-led-matrix-driver

• Henner Zeller hzeller: PCB adapter + Driver for Hub75 RGB Matrixes, 3x HUB75 (Raspberry PI)

  • #1 https://github.com/hzeller/rpi-rgb-led-matrix/tree/master/adapter
    • wiring info: https://github.com/hzeller/rpi-rgb-led-matrix/blob/master/wiring.md
    • Example video #1: https://www.youtube.com/watch?v=1aDurOOmkeo
    • Example video #2: https://www.youtube.com/watch?v=gTtBLEOPpsM
      • and his github project https://github.com/ModusCreateOrg/network-rgb-matrix-display/blob/master/md/How_it_works.md
  • #2 https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/

• ESP32-Trinity, 1x HUB75 (ESP32)

  • https://github.com/witnessmenow/ESP32-Trinity
  • More of Brian Lough’s devices https://www.tindie.com/stores/brianlough/

• Adafruit Matrix Portal - CircuitPython Powered Internet Display (ATSAMD51J19 Cortex M4)

  https://www.adafruit.com/product/4745

How many panels can i chain (ESP32, RPI, PICO, Teensy, STM32)

https://community.pixelmatix.com/t/how-many-panels-can-chain/1336

ESP32 Audio DMA Settings Explained - dma_buf_len and dma_buf_count

https://www.youtube.com/watch?v=ejyt-kWmys8

ESP32 LCD/Camera Mode. (Source:ESP32 documentation)

LCD/Camera mode is only supported on I2S0 over a parallel bus. For LCD mode, I2S0 should work at master TX mode. For camera mode, I2S0 should work at slave RX mode. These two modes are not implemented by the I2S driver. Please refer to LCD for details about the LCD implementation. For more information, see ESP32 Technical Reference Manual > I2S Controller (I2S) > LCD Mode [PDF Pg 323 “12.5 Camera-LCD Controller”].

• “[ESP32-S2] How do I use the I2S to control a 8-bit parallel LCD? (IDFGH-3242)” i2s_parallel_pin_config_t https://github.com/espressif/esp-idf/issues/5238

Bitluni Brings All the ESP-32 Multimedia Hacks to Supercon ( i2S and DMA intro )

https://www.youtube.com/watch?v=AZYjIPrQe7s

Arduino UNO Based HUB75 LED DISPLAY DRIVER

https://www.instructables.com/Arduino-UNO-Based-HUB75-LED-DISPLAY-DRIVER/

ESP32-HUB75-MatrixPanel-DMA

• LED/DMA library: https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA
• discussion: https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA/discussions/155
  • Use level shifter HCT245 : https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA/issues/35

Driving a Hub75 RGB LED Panel #explanation

https://www.youtube.com/watch?v=FK7j8IgtUX0

ESP32 driving a large RGB panel( HUB75 )

• video: https://www.youtube.com/watch?v=q3o826CNeUY
• video: https://www.youtube.com/watch?v=xRGZkkkexEc
• creators forum: https://cicciocb.com/annex32help/V1.518/#HUB75 Matrix Displays - DMAMATRI[18] X
• used LED/DMA library: https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA

ESP32 streaming webcam to LED panel using BLE & WS2812

• video: https://www.youtube.com/watch?v=9JGHVFmSddU
  • ESP32 BLE ref: https://github.com/espressif/arduino-esp32/blob/master/libraries/BLE/src/