Fahre seit Anfang des Jahres ganz gut mit der Ladekarte von ewego und enbw (mobility s Tarif). Damit kostet die kWh an den meisten dc Ladern um die 60ct. Habe die electroverse App um ggf. einen günstigeren schnapper zu machen, das klappt vor allem mit ac Ladern.

If you have a PEI sheet, try glue stick on the PEI sheet to print. The glue stick acts as a leveraging agent after printing, you can wash it off with warm water - otherwise the flexibles tend to stick too good and ruin the built plate. I use this method on my prusa mini for TPU where I had similar issues. Sticking flexible filament on the textured sheet can be hard, I had success by printing the brim layer in PLA in the past - but that was still on a Makerbot Mk2 which didn’t even have a heated bed.

Buy from EU would be ironic in a by choice not EU country community…

Nope, that’s pretty much exactly how my brain works, too. Or maybe we both have the loose wires?

What about a framework laptop 16?

https://frame.work/de/en/products/laptop16-diy-amd-7040

I own the 13 AMD and have not regretted the purchase for a second.

Computer Bild Spiele und mogelpower