And the rest are pure analog

90% of industrial devices are still 100 Mbit/s.

I miss the days when everything wasn’t glued together. The biggest hurdle to battery replacement or screen replacement is all that damn glue.

You’re holding it wrong- that’s the Magic Valley

You kinda only need the email credentials. Shouldn’t the rest be resettable from that point?

Is there anything that needs MFA that they won’t have?

I’ve never bothered to reverse engineer the protocols they use between the main chip and ESP, but I have hooked the main loads, indicator LEDs, and push buttons into my own module. Air purifier, robo vacs, coffee pots, sprinkler controllers, garage doors.

The Shelly uni is awesome for stuff without dc power supplies. I’ve got one in my gas cooktop, and another in the range hood to run the fan any time a burner is on.

What’s funny to me, is that most of the trash tier connected appliances also run an ESP32 but with the opposite design goals

Am I not YAMLy enough for your YAML club?

Unless you have a CVT, which was dying since the day it was born anyway.

And if fresh fluid kills your trans, the friction disks were already toast and being helped along by the crud in the old thin fluid.

Well yeah- when the transmission fails, the car has reached the end of its life!

I’ve been H/W Quick Eraseing ESP32s and ATMEL chips for over a decade now

They’re like French door refrigerators. Conspicuous consumption drives the initial purchase, and people paid too much money to admit it sucks and they made an expensive mistake.

Isn’t that the dream for every business ever?

The “find my” networks still function with randomized macs and “fully” powered down devices

https://knowledgebase.frame.work/en_us/hibernation-on-linux-BkL1N5ffJg

You don’t need a framework laptop to get unsupported “as-is” hibernate .

If that is a stable option, why doesn’t Framework enable it by default?

L2 or L3 chargers?

Any idea why they went with an open prop vs a ducted fan?

edit: the motors are 600mm diameter, so not easy to install in the duct is my guess. It’s impossible to package an inboard configuration on such small airframes.

Most brooms are sold with a dustpan attached.