Yes.

Let me tell you when, why, and how I learned that you need to pay attention to taxes.

I was in third grade and my class had a field trip. This was 47 years ago, so the exact details of the trip are lost to time and rusty memory. The lesson remained.

There was something that the class could purchase at the end of the day on the trip and the place only took cash and the school was not doing anything to help, except tell the kids about it and the price. Which was something like $5. I told my Mom and she handed me a $5 bill, plus a quarter, which confused my 3rd grade brain. She said to due to some strange words "sales tax, which was 5% in my state at the time. Got to school that morning and all my classmates were proud that they had their $5 bill, but none seemed to have a quarter. So I kept the presence of my quarter a secret and was a little embarrassed about it. Yes, I was young and stupid. Now I am old and stupid.

When it came time to purchase the whatsit at the end of the day, me and one other of my classmates produced a quarter to buy it. The teachers and chaperones had to cover the sales tax for the other 20 kids and they were pissed.

I went to school and learned a lesson that has stuck with me for nearly 50 years.

Mensa membership is directly correlated to taking online IQ tests.

Truly intelligent people don’t.

I’m a cook as a hobby, so typically the cost of making vs buying does not figure into my decision, except when things at the store get absurdly expensive.

A case in point: Toasted Sliced Salted Salad Almonds from Fresh Gourmet

My wife and I love these on our dinner salads so we go through a lot of them. The cost of a package of these salad almonds has risen to $7 for a 3.5oz (99g)package.

I can buy a 16oz (454g) package of raw almonds for almost the same amount of money, as the 3.5oz (99g) Fresh Gourmet package. I have an electric oven that consumes around 5kwh that runs for roughly 30 minutes during preparation and my daytime electric rate is around $0.13/kwh (I think).

Out of that I get a full pound (16oz, 454g) of salted almonds for ~$7.07 and 30 minutes of my time. I also use about $0.02 worth of salt, bringing the total cost to ~$7.09 for 4.5 times more almonds.

I also can adjust the amount of salt on them as well, as typically my wife and I like less salt that most people.

It’s also fun to do.

Learning how to type.

You either had to take typing, or some other class that I can’t remember during my junior year. The other class didn’t appeal to me at all, obviously as I cannot even remember it now, so I took typing. By happenstance my best friend was in the same class.

The class taught me a skill that I use till this day, some 38 years later.

Transistors.

The first working transistor was created in 1947. Before then it was just vacuum tubes. Less than 80 years later the modern world relies completely on its existence.

You use billions of them in your everyday life.

Harold “Wisconsin” Johnson is the answer to your question.

Actually got to meet him this past Sunday in Lake Geneva, WI at the “Dreams and Nightmares” Convention put on by the Wisconsin Historical society. Also got to meet Tom Wham, who is the original artist for many creatures in the original Monster Manual including the Beholder.

Wisconsin Johnson was hired to to be an editor of the original first edition books. His degree from Northwestern University is listed as a BS in Biology. What that doesn’t tell you is he minored in European and Eastern history. He has extensive knowledge of European, Middle Eastern, Sumerian and Asian mythologies. He used that knowledge to add to the AD&D compendium. He drove a lot of design and content in the 1e days at TSR as he was promoted very quickly after he was hired.

Also, there is a AD&D Monster Manual II that is even larger than the original.

As to why he is called “Wisconsin Johnson”. He loves to wear hats, especially at conventions so that people could find him. He settled on wearing a Fedora exactly like Indiana Jones wore. Someone even called him “Indiana Johnson”, but Harold stated emphatically that he was from Wisconsin. So the moniker Wisconsin Johnson was born. Yes, he was wearing his Fedora this past Sunday at the convention I attended.

8 way skydive. Two friends were getting married and they wanted to do a formation skydive as part of their wedding ceremony. They were going to get married, then 8 of us would get into the plane and do an 8 way formation dive. Land and eat cake.

The problem was they were both low time jumpers, with about 70 jumps each. The other 6 jumpers were all highly experienced, so we tried to make it work. The jump in question was a practice jump about a month before the wedding.

The bride fell out of the formation and went low. Meaning she was below everyone else and was continuing to get even lower. People in a formation will fall more slowly than an individual.

The formation of 7 other jumpers gets to about 5000ft and she is about 500ft below us and just sitting there. She is making no moves to track out and it is becoming a very dangerous situation. Then she starts waving off, which is what you’re supposed to do right before deploying your parachute. We all see it, break the formation turn and burn. The jumper to my right videoed the whole thing. By happenstance I was the closest to her. The video shows me in a full track when she and her deploying main parachute come into frame. I might have missed her by about 20ft. Later she told me I sounded like a jet airplane passing by.

Everyone needed a change of underwear after that jump. I grounded her except for coached jumps, which I took on myself. I did about 15 jumps with her over the next month with increasing number of people until it clicked with her on how formation skydiving actually works.

We did not get to do the jump the day of the wedding unfortunately. Just after the nuptials were completed and we were to head to the airplane an intense thunderstorm blew in grounding the planes. We still held the reception in the hanger though and it was a good time. We did the wedding jump a couple of weeks later and sent the video to all the wedding guests.

But yeah, it was pretty fucking scary.

I’m still here.

I keep reading it, so added for comedic effect…

I’m a Gen X’er… Not sure if the Lemmy’s word limit on posts would allow me to list it all.

So here are a few:

Drank from the garden hose? Check

Rode in a car without seat belts? As a toddler? As a baby? Check

Rode my bike all over town with no helmet? Had an accident that put me in a coma for 48hrs because of not wearing a helmet? Check

Harvested tobacco on my grandparents farm? Check (Anyone who has done this by hand, working with those stakes knows the risks.)

I started skydiving in the early 90’s. My mother was absolutely appalled and constantly berated me about how “dangerous” it is to jump out of an airplane.

The truth of the matter was I was far safer in free fall than I was during most of my adolescence.

I have two Wireless Access Points (WAP) and a separate router/ firewall. The WAPs are meshed, meaning as a WiFi connected device moves through my house, it will be automatically handed off to the WAP with the best quality.

Power and channel of the two WAPs use are automatic. I live in a fairly dense neighborhood. Meaning my neighbors are so dense they barely have done any configuration of their WiFi. There are also a lot of them. The main thing I worry about is having just enough transmit power to give a good quality connection within the house, without being so strong it interferes with my neighbors’ networks.

I would never leave the management of my home network to an ISP. With that said, I’ve been an IT professional for 30 years and got my start in networking.

My upstairs WAP often works at higher power, but I don’t remember seeing it at 100%. It is fighting all the other WiFi routers that are nearby. There are so many that there are no clear channels on 2.4GHz and very few at 5GHz. The WAP in the basement is better shielded, so I almost never see it at high transmit powers.

My router is a separate unit that provides routing, firewall, IPS/IDS, DNS, and management for itself and the WAPs.

No, you almost never require 100% transmit power out of a WAP. The best thing is to have a good quality WiFi router or WAP and set it to “automatic” for channel and power settings. That way the unit can determine what is best for network quality on the fly. It will be better at it than you logging in multiple times a day doing the same thing manually.

Can confirm.

Am old.

Scored a zero.

When used properly, yes absolutely.

Vinegar is very useful in balancing flavors in recipes. Personally, I love balsamic vinaigrettes far better than other dressings. Malt vinegar on french fries is better than ketchup (and no I’m not British). Mario Batalli’s “Chicken in Cooked Wine” would be very boring without a healthy dose of red wine vinegar.

Everyone has different tastes. I personally detest olives, passion fruit, and rye bread. My wife absolutely loathes eggplant.

Random bonus content, mainly because I made this last night for dinner:

My Alabama White BBQ sauce recipe:

3/4c Mayo

2 TBSP Sugar

1tsp Prepared Horseradish

2TBSP Apple Cider Vinegar

1/2tsp Salt

1/2tsp pepper

1/4tsp cayenne pepper.

Throw all the above into a food processor and blend till smooth. Great on chicken and french fries.

I have to agree with you.

Actors that have been “de-aged” or simulated just don’t quite cross the uncanny valley for me. I loved Tron Legacy, but the de-aging on Jeff Bridges was just off. So those scenes with CLU and in the past just drew me out of the film.

It is a cinematic triumph. Peter Cushing himself called it his greatest role! Well, he might have said that.

Fun fact that I actually just learned today. The cast made from Mr Cushing’s face for his scene in Top Secret was used by the SFX wizards working on Rogue One to digitally recreate the actor for the movie.

Imagine that, a casting for a prosthetic made over 40 years ago was used to recreate the image of Peter Cushing so that he could appear as Grand Moff Tarkin again.

Have to admit, that rather stunned me when I read it.

Older Gen X’er here.

This list was basically a Tuesday for me back in the day.

SIR/MADAM! I call foul! Most foul!

Your list is horribly disingenuous, due to the absence of Val Kilmer’s greatest movie:

Top Secret

1985 Pontiac Sunbird and my parents had a 1986 Buick Skyhawk. Both were exactly the same car, just different front fascia. Same crappy 1.8L SOHC engine and terrible build quality.

Both cars blew head gaskets at 50,000 miles and my Sunbird blew it again at 65,000miles. Neither car were ever overheated. The A/C on both cars died at 60K. Various parts of the exterior and interior were just plain falling apart. The cars’ performance was absolutely abysmal.

The cars were so bad that I haven’t purchased another GM product since, nor will I ever buy another product from GM. My Dad had bought a mid-90’s Oldmobile 88 and it was actually OK for the most part. It just ate alternators, until I convinced him to put an upgraded aftermarket unit on and that problem was solved. Later he bought a Chevy Traverse and that thing was an absolute piece of trash. He had to put timing chains on it at 70k and that was a $2500 bill. The power steering also went out on it multiple times. He had the steering rack and power steering pump replaced multiple times.

I traded my old Sunbird in on a 1985 Toyota Corolla GT-S and THAT was my absolute favorite car of all time. I autocrossed it for several years and it never broke. I’d love to find one to restore. I have owned multiple Toyotas in my 39 years of driving. My current car is a Camry Hybrid.

That is a generally accepted rule for repairing a car. It is not hard and fast, as it is not a simple decision. So you are correct, it’s not right, but it is also not wrong either. It’s a matter of whose yacht you want to finance? Your mechanic’s, or your lender’s.

The only time I would consider putting more than half the worth of a car into fixing it, is if it is a vehicle that is difficult or impossible to replace. Case in point is I have a friend that has one of the last Toyota Camry’s with a manual transmission to come off the production line. He bought it new. About 4 years ago at a bit over 200k on the odometer, he replaced the short block, plus a lot of other work to essentially make the car “new” again. His total bill was over $10k, which is more than the car is worth in total. Why? He just loves it that much and Toyota no longer offers a manual in the Camry. He hates automatics and has declared it will be a cold day in hell before he ever owns one.

This is exactly why an automobile should be treated as a depreciating asset, rather than an investment.

You fix a car if it will cost less than half of its value at the time of the repair. If it cost more than half, get rid of it at the first opportunity. There are caveats to that rule of course. So don’t fault yourself for buying another car.

You had some bad luck and that is just a part of owning a car. In commiseration, I invested $2500 into an Acura TL that I dearly loved for timing belt and some other 100K maintenance items. Only to have its transmission blow up less than 4 months later. The $2500, plus the transmission replacement would have been well over half the value of the car. I traded it. For a car that I still own and absolutely loathe, but it’s been reliable and I’ve put over 160,000 miles on it. My oldest kid now drives it.

The short answer is:

Keep your current car. It’s basically new. From a manufacturer that is notable for the reliability of its products. You also know its maintenance history, which is incredibly important.

Have your payments kept ahead of depreciation? Meaning, can you sell your car for enough to pay off your loan? Just so you know, that’s almost always “no”, but your results may vary. You would also be forced to buy another car. 7.59% APR sucks, but are you able to get a better rate now on another car? Do you have the down payment for another car? Again, you may not have any money left over from selling your current car and paying off the lien.

If you can refinance it at a lower the rate, then absolutely that is the path you should take. If not, then taking a more global look at your finances are in order to make the payment more palatable.

Je ne parle pas Francais.