FM with ADSR - lag?
youtu.be

I want to do fm with the asdr, but even with all potis fully down, the pitch starts high and takes about a second to get down.

Is this broken, is it a quirk of the 2600?

Ideally, I would want it to stay flat if all potis are down.

My intent is to generate a similar effect to the lag but much shorter.

Edit: I tried the same with the Arturia 2600 VST, that one behaves as expected.

  • pansapiens@lemmy.sdf.orgEnglish
    1·
    2 years ago

    I tested this on my Behringer 2600 and got similar behaviour, so I suspect it’s a quirk if the hardware, (one that is possibly not emulated by the Arturia VST). One way around it seems to be to patch a gate into the ADSR gate input instead of using the manual trigger button - try patching the internal sample and hold clock into the ADSR gate input, and the envelope stays flat until you raise some of the sliders.

    I wonder if it happens when you trigger via MIDI ? (I didn’t test) Patching the KBD gate or trigger from the left hand side into the ADSR would be an option to try too.